If you’ve ever had a toilet that won’t flush, you know how frustrating it can be.

It’s not only inconvenient, but it can also be a health hazard if not addressed quickly.

Fortunately, there are a few troubleshooting tips that can help you get your toilet flushing again.

In this article, I’ll provide you with five troubleshooting tips to fix a toilet that won’t flush.

5 Best Troubleshooting Tips to Fix a Toilet That Won't Flush
Do you have a toilet that won’t flush? Here are 5 Troubleshooting Tips to Fix a Toilet That Won’t Flush!

Why is Your Toilet Now Flushing Properly?

Having a toilet that won’t flush can be an extremely frustrating experience. Fortunately, several troubleshooting tips can help you determine the cause of the issue and fix it.

In this article, we will discuss five troubleshooting tips that can help you determine why you have a toilet that won’t flush and how to fix it. 

Troubleshooting Tip #1: Check the Toilet Handle

The first troubleshooting tip is to check the toilet handle.

The handle is connected to a chain that lifts the flapper, which allows the water to flow from the tank into the bowl.

If the handle is loose or broken, it won’t be able to lift the flapper and you’ll experience a toilet that won’t flush.

To check the handle, first, inspect it for any signs of damage or wear.

If it looks okay, then check the chain to make sure it is connected properly.

If the chain is broken or disconnected, it will need to be replaced. 

Troubleshooting Tip #2: Check the Flapper

The second troubleshooting tip is to check the flapper.

The flapper is a rubber valve that is located at the bottom of the tank and is responsible for controlling the flow of water from the tank into the bowl.

If the flapper is damaged or worn, it won’t be able to open properly and the toilet won’t flush.

To check the flapper, first, inspect it for any signs of damage or wear.

If it looks okay, then try to open it manually. If it won’t open, then it will need to be replaced. 

Troubleshooting Tip #3: Check the Fill Valve

The third troubleshooting tip is to check the fill valve.

The fill valve is responsible for controlling the water level in the tank.

If the fill valve is damaged or worn, it won’t be able to maintain the proper water level and the toilet won’t flush.

To check the fill valve, first, inspect it for any signs of damage or wear.

If it looks okay, then try to adjust it manually. If it won’t adjust, then it will need to be replaced. 

Troubleshooting Tip #4: Check the Float

The fourth troubleshooting tip is to check the float.

The float is a small device that is located inside the tank and is responsible for controlling the water level.

If the float is damaged or worn, it won’t be able to maintain the proper water level and the toilet won’t flush.

To check the float, first, inspect it for any signs of damage or wear.

If it looks okay, then try to adjust it manually. If it won’t adjust, then it will need to be replaced. 

Troubleshooting Tip #5: Check the Drain Line

The fifth troubleshooting tip is to check the drain line.

The drain line is responsible for carrying the water from the tank to the bowl.

If the drain line is clogged or damaged, it won’t be able to carry the water and the toilet won’t flush.

To check the drain line, first, inspect it for any signs of damage or blockage.

If it looks okay, then try to clear the line manually. If it won’t clear, then it will need to be replaced. 

5 Best Troubleshooting Tips to Fix a Toilet That Won't Flush
5 Best Troubleshooting Tips to Fix a Toilet That Won’t Flush

Conclusion

In conclusion, several troubleshooting tips can help you determine why your toilet won’t flush and how to fix it.

These tips include checking the toilet handle, flapper, fill valve, float, and drain line.

If these tips don’t work, then it is best to call a professional plumber for help.

A professional plumber will be able to diagnose the problem and provide a solution quickly and efficiently.

Frequently Asked Questions

What should I do if my toilet won’t flush?

If your toilet won’t flush, try these five troubleshooting tips: 1) Check the toilet handle and chain for any obstructions or damage; 2) Check the toilet tank for any clogs or blockages; 3) Check the water level in the tank; 4) Check the flapper valve to make sure it is opening and closing properly; 5) Check the fill valve to make sure it is working correctly. If none of these tips resolve the issue, you may need to call a plumber.

How do I check the toilet tank for any clogs or blockages?

To check the toilet tank for clogs or blockages, first, turn off the water supply to the toilet. Then, remove the tank lid and inspect the inside of the tank for any debris or blockages. If you find any, use a plunger or a toilet auger to remove them. If the clog persists, you may need to call a plumber.

Categorized in: